High current 18650 6s LTO bms 14.4v 100A 120A 200A 250A lithium battery system board LTO bms pcm pcb for Solar energy store

    High current 18650 6s LTO bms 14.4v 100A 120A 200A 250A lithium battery system board LTO bms pcm pcb for Solar energy store Specification & Description Summary

    High current 18650 6s LTO bms 14.4v 100A 120A 200A 250A lithium battery system board LTO bms pcm pcb for Solar energy store Specification

    • Brand NameDALY
    • Accessory TypeBattery Accessories
    • OriginCN(Origin)
    • Model NumberDL6S

     High Current 6s LTO  bms 14.4v 20A 40A 60A lithium battery management system board LTO bms pcm pcb for Solar energy store

    Feature

    Model: DL6S (2.4V rated LTO  Battery not for 3.2V Rated LiFePO4 or 3.7V Rate Li ion)
    Common Version : common port for charge/discharge 
    We can customize any PCB from 5S to 32S lithium batteries with different current.
     
    1. Overview
    ◆DL6S 14.4V 100A 120A 200A 250A  bms is used for 6series 14.4V for LTO battery pack.
    ◆We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.
    ◆The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection,  etc. 
     For Need the temperature protection function , Please contact us to add the temperature sensor. 
    ◆According to the customer request we can develop PCM in different sizes and structures.
    ◆BMS manufactured by  high quality Mos and IC imported . Keep your battery long cycle serivce life time.
     
     
    LTO 6S BMS size as below:
     
    Current5S BMS sizeRemark
    100A150*66*25mmCommon port 
    120A180*66*26mmCommon port 
    200A211*120*32mmCommon port 
    250A211*120*32mmCommon port 

     

     

     
    B- Cable  and  P-  cable size as below:
    详情页_04
     
     
    2. Advantage
     
     
    ◆Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan. IC itself has power balancing function. The circuit is simple and reliable.

    ◆Strong load ability, constant discharge current 100A 120A 200A 250A, , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.

    ◆Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during charging and discharging.
     
    ◆Extreme low power consumption. The consumption of the whole device is less than 50uA.
     
    ◆PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.
    详情页_02-2
     
    3. The Common Port Wire Connection & Separate Port it connection Way is Differet as Below:
     

     The cable starts from the black thin wire connecting B-, the second wire (the thin red wire) is connected to the positive pole of the first battery, and the positive pole of each battery is connected in turn until the last red wire is connected to B+;

       After connecting the wire, mustn't insert the plug directly into the BMS  . Measure the voltage between each two adjacent metal terminals on the back of the plug. If the voltage of the terpolymer battery should be between 2.8V and 4.2V, the iron-lithium battery should be between 2.5V and 3.65V.

    After correct wiring sequence and voltage confirmation, insert the BMS socket.

     The protective board B line (blue thick line) is connected to the negative pole of the battery pack.

     After the wiring is completed, measure whether the total voltage of the battery pack and the total voltage passing through the BMS are equal. If they are different, check again according to the above wiring sequence.

    详情页_03
     
    4. The BMS can be used to below tools:
     
    详情页_04
     
    5.  The package picture as below only for reference, Please refer to the actual received phyical . The cable is free. Daly will send it to customer with BMS.
     
    详情页_06
     
     
     
    6. Daly has his own R & D team & Automachine production line. Not only does Daly have a hardware board, but now Smart BMSs are on the market. Daly's product quality has been tested by the market and customers can choose it which is right decision.
     
    Factory address: No.92, Lihe Road,ShuiPing Village Dalang Town,Dongguan City, Guangdong Province ,China 523800                                                                                                                                                                         
     
    详情页_05
     
    Product Details
    High current 18650 6s LTO bms 14.4v 100A 120A 200A 250A lithium battery system board LTO bms pcm pcb for Solar energy store

    Clearance Sale. Hot Deals

    € 41,30 - 130,30
    3
    (based on 7 user reviews)
    Producer: MaJack
    Identifier: 4000974790353
    Volume Retail Sales: MaJack piece
    Availability: 842 pieces
    Last Update : Sun, 24 Jan 2021
  • follow us